Betekenis van:
organic process

Voorbeeldzinnen

1. a regenerated cellulose fibre obtained by dissolution, and an organic solvent spinning process, without formation of derivatives
2. The quantity of organic solvents which remains as contamination or residue in products output from the process.
3. [A complex combination of organic compounds obtained by the distillation of products from a steam cracking process.
4. The process employs high temperature combustion in excess oxygen to oxidise organic matter to CO2, NO2 and H2O.
5. LCI = lowest concentration of interest; see ‘Health risk assessment process for emissions of volatile organic compounds (VOC) from building products’ (Federal Environmental Agency).
6. Organic solvents contained in mixtures recovered for reuse but not as input into the process, as long as not counted under O7.
7. The process employs high temperature combustion in excess oxygen to oxidise organic matter to CO2, NO2 and H2O. A batch process is used with a prolonged residence time for the animal by-products of around 24hrs.
8. by polymerisation of organic monomers to produce polymers such as polyamides, polyesters, polyolefins or polyurethanes, or by chemical modification of polymers produced by this process (for example, poly(vinyl alcohol) prepared by the hydrolysis of poly(vinyl acetate)); or
9. [A complex combination of organic compounds obtained by the distillation of products from a steam cracking process. It consists of unsaturated hydrocarbons having carbon numbers predominantly in the range of C5 through C12.]
10. The notification shall be communicated also to the other Member States and to the Commission and shall give details of actual or estimated total production and use of the substance concerned and the nature of the closed-system site-limited process, specifying the amount of any non-transformed and unintentional trace contamination by any persistent organic pollutant starting material in the final product.
11. Slurry Deposition is a surface modification coating or overlay coating process wherein a metallic or ceramic powder with an organic binder is suspended in a liquid and is applied to a substrate by either spraying, dipping or painting, subsequent air or oven drying, and heat treatment to obtain the desired coating.
12. The emissions of VOCs during polymerisation and fibre production of polyester, measured at the process steps where they occur, including fugitive emissions as well, expressed as an annual average, shall not exceed 1,2 g/kg of produced polyester resin. (VOCs are any organic compound having at 293,15 K a vapour pressure of 0,01 kPa or more, or having a corresponding volatility under the particular conditions of use).